Auto backwash filters(Automatic backwash filters) on ships operate on a similar principle as those used in other industries, with a focus on efficiently removing impurities from seawater to ensure the proper functioning of various shipboard systems.
▪ Water Intake:
Ships draw seawater for multiple purposes, including cooling engines, operating desalination units, and filling ballast tanks.
Seawater enters the ship's filtration system through dedicated intake pipes.
▪ Pre-Filtration:
Before reaching the auto backwash filter, the seawater may go through pre-filtration stages to remove larger debris and particulate matter.
▪ Auto Backwash Filter Placement:
The automatic backwash filter is strategically placed in the water intake system, typically after the pre-filtration stages.
It consists of a filter bed or media, which could be composed of materials like sand, gravel, or other granular substances.
▪ Filtration Phase:
As seawater flows through the filter media, suspended particles, sediments, and impurities are trapped, allowing only clean water to pass through.
The filter bed gradually accumulates a layer of contaminants over time.
▪ Pressure Differential or Time-Triggered Backwash:
The auto backwash process is initiated automatically based on predetermined factors such as pressure differentials across the filter or set time intervals.
The system continuously monitors the condition of the filter.
▪ Backwash Initiation:
When the system detects a decrease in flow or an increase in pressure, signaling a clogged filter, the backwash cycle begins.
Alternatively, the backwash process may be initiated periodically to prevent clogging before it becomes problematic.
▪ Reverse Flow:
A portion of the clean water is diverted in the opposite direction through the filter media.
This reverse flow dislodges the accumulated particles, sediments, and impurities from the filter bed.
▪ Dislodged Contaminant Removal:
The dislodged contaminants are carried away by the backwash water.
To prevent environmental impact, some ships may treat the backwash water before discharging it overboard, ensuring compliance with environmental regulations.
▪ Resettling of Filter Media:
After the backwash cycle, the filter media resettles, ready to resume the filtration process.
The system returns to the filtration phase, providing a continuous supply of clean water to shipboard systems.
In summary, auto backwash filters are integral to maintaining the integrity of shipboard water systems, contributing to the reliability and efficiency of various marine operations.
We offer auto backwash filters and other self-cleaning filters for ships. Contact us today!
