The filter housing is made of 316L or 304 high-quality stainless steel with the inside and outside mirror-polished. The filter elements are made of titanium rods, which make it has the following characteristics: corrosion resistance, high temperature resistance, impact resistance, non-toxic, no particle shedding, no absorption of chemical components, Long service life (normal service life 4-5 years), easy to clean, renewable, etc.
The filter housing is made of 316L or 304 high-quality stainless steel with the inside and outside mirror-polished. The filter elements are made of titanium rods, which make it has the following characteristics: corrosion resistance, high-temperature resistance, impact resistance, non-toxic, no particle shedding, no absorption of chemical components, Long service life (normal service life of 4-5 years), easy to clean, renewable, etc. The titanium rod filter element belongs to deep filtration. Not only a dense filter layer with gaps is formed on the surface of the titanium rod, which plays a filtering role, but the particles can also be attached to the wall of the channel to form a "bridging phenomenon", intercepting the particles with smaller pore size than the titanium rod and improving the filtration degree.
The principle of filters
When the filter medium enters the filter cartridge from the liquid inlet, the impurities are first intercepted by the surface of the titanium rod, and a dense filter layer with gaps is formed on the surface of the titanium rod. This filter cake layer can also filter. Particles smaller in size than the pore diameter of the titanium rod enter the micropores on the titanium wall, and the particles are easily intercepted after entering, due to the complex pore pores on the wall tube. And the particles are tightly attached to the walls of the pores because of squeezing and collision effects caused by the fluid flowing through. This kind of filtration is carried out inside the titanium rod, which belongs to deep filtration. Impurities are intercepted on the outer surface and inner wall of the titanium rod. The filtered clean material flows out from the water outlet. When the impurities in the filter cartridge accumulate, the pressure on the filter will increase. When it reaches 0.3MPa, it will be filtered. The titanium rod needs to be regenerated.
The main technical parameters
Titanium filter elements (powder sintered)
Main performance
Titanium filter elements (including expanded tube type and plate type) are made of industrial high-purity titanium powder (grade O) through high-pressure and high-temperature sintering. The superb production technology, special production process and the performance characteristics of titanium itself make the titanium metal powder sintered filter element have excellent performance:
1. Uniform structure, narrow pore size distribution and high separation efficiency.
2. High porosity, low filtration resistance and high penetration efficiency.
3. High temperature resistance. Generally, it can be used normally at a wet state below 280 degrees.
4. Good chemical stability, acid and alkali corrosion resistance, and oxidation resistance.
5. Non-magnetic and non-toxic. And it has good compatibility with human tissues and blood, widely used in the pharmaceutical industry, food industry, and water treatment industry.
6. No particles fall off, no secondary pollution to the original solution. Comply with food hygiene and pharmaceutical GMP requirements.
7. Strong antimicrobial ability, does not interact with microorganisms.
8. It can be regenerated online. Easy to clean, long service life (generally several times of membrane filter element).
Titanium Rod Filter Specification and Type
| Type | Specification | import and export | Dimensions | ||
| filter cartridge | length mm | diameter mm | tank diameter | Total height | |
| YTF102-5 | 1 | 5" | 25 | 102 | 570 |
| YTF102-10 | 10" | 690 | |||
| YTF102-20 | 20" | 940 | |||
| YTF102-30 | 30" | 1190 | |||
| YTF184-10 | 3 | 10" | 32 | 184 | 720 |
| YTF184-20 | 20" | 980 | |||
| YTF184-30 | 30" | 1210 | |||
| YTF219-10 | 5 | 10" | 38 | 219 | 730 |
| YTF219-20 | 20" | 990 | |||
| YTF219-30 | 30" | 1220 | |||
| YTF219-40 | 40" | 1460 | |||
| YTF273-20 | 7 | 20" | 45 | 273 | 1060 |
| YTF273-30 | 30" | 1290 | |||
| YTF273-40 | 40" | 1530 | |||
| YTF325-20 | 9 | 20" | 51 | 325 | 1080 |
| YTF325-30 | 30" | 1310 | |||
| YTF325-40 | 40" | 1550 | |||
| YTF350-20 | 12 | 20" | 57 | 350 | 1150 |
| YTF350-30 | 30" | 1380 | |||
| YTF350-40 | 40" | 1620 | |||
| YTF400-20 | 18 | 20" | 76 | 400 | 1160 |
| YTF400-30 | 30" | 1390 | |||
| YTF400-40 | 40" | 1630 | |||
| YTF450-20 | 21 | 20" | 89 | 450 | 1190 |
| YTF450-30 | 30" | 1420 | |||
| YTF450-40 | 40" | 1660 | |||
| Note 1. Filter element interface forms: M20/M30, 222 (plug-in type), 226 (snap-in type), flat pressure port, threaded port, etc. Special interfaces can be customized. 2. Import and export connection forms: quick installation, thread, flange, etc. 3. Pressure gauge (optional). | |||||
Application field
Pharmaceutical industry: decarburization filtration in the concentrated preparation of large infusions, small injections, eye drops, and oral liquids, and security filtration before terminal filtration in the dilute
preparations: In the production process of the raw material medicine, the impurity removal, the decarbonization filtration and the fine filtration of the materials are carried out.
Water treatment industry: ultrafiltration, RO, E DI system security filtration in the water treatment industry, filtration after ozone sterilization; security filtration before reverse osmosis in the field of seawater desalination.
Food industry: clarification and filtration of beverages, fruit juice, liquor, beer, vegetable oil, mineral water, soy sauce and vinegar in food.
Chemical industry: decarbonization filtration and precision filtration of liquid products, liquid raw materials, and pharmaceutical intermediates in the chemical industry, filtration and recovery of ultra-fine crystals, and catalysts, Precise filtration after resin adsorption and impurity removal and filtration of system heat transfer oil and materials; High-temperature decarbonization and de-white clay filtration in the dye industry.
Petroleum industry: oilfield reinjection water filtration.
In the above industries are involved: Material retention and filtration in the vacuum feeding system (titanium filter element plays a dual role in preventing the leakage of powder materials and environmental pollutants); Steam, compressed air, and catalytic gas filtration in gas purification.
Contact us
For advice and custom cartridge filters or stainless steel filter housings please contact us directly for a quote.
WhatsApp:86 13653285589, Email: sales@yubofilter.com
Our team of filter experts is available 24/7.
We have specialized in industrial filtration for more than 10 years.
