The wire wound filter element is a kind of filter element made of textile yarn with good filtering characteristics and precisely wound on a porous skeleton.
The wire wound filter element is a kind of filter element made of textile yarn with good filtering characteristics and precisely wound on a porous skeleton. It can be controlled into a filter element of different precision through the winding tightness and thinness of the yarn during winding. The processing technology of outer loosening and inner tightening gives a good pre-filtering effect. It belongs to deep filtration, with strong dirt holding capacity and long service life.
Technical parameter
1. Polypropylene wire wound filter element can be used for non-organic solutions such as water acid and alkali, chemical solutions, etc. The operating temperature is ≤60℃.
2. The center rod of the absorbent cotton fiber filter element is made of stainless steel for organic solvents, water, oil, alkaline solutions, beverages, medicines, etc. and the operating temperature is 120°C.
3. Maximum pressure: ≤0.5MPa. Maximum pressure drop: 0.2MPa.
4. Maximum working temperature- Polypropylene wire: polypropylene frame ≤60°C; stainless steel frame ≤80°C. Absorbent cotton thread: stainless steel frame≤120℃.
Filtration accuracy
1. Filtration accuracy: 1μm, 5μm, 10μm, 20μm, 30μm, 50μm, 75μm, 100μm.
2. Outer diameter of filter element: φ60mm, φ65mm.
3. Inner diameter of filter element: φ28mm, φ30mm.
4. Filter element length: 10", 20", 30", 40".
Industry application
It is suitable for the filtration of tap water, food and beverage water, domestic water, cooling circulating water, boiler water supply, oil field workover fluid and water injection, organic solvent, electroplating fluid, oil, ink, medical products, etc.